Gold Karats Explained
Purity, marks, and what to buy
A gold karat tells you how many of 24 parts by weight are gold. An 18K alloy is 18 parts gold and six parts other metals, so the alloy is 75% gold. Use karat to compare gold content, then look at the piece’s shape, construction, and finish to decide how it will fit your life.
What does karat mean in gold?
Karat measures the gold fraction of a metal alloy by weight. Divide the karat number by 24 and multiply by 100 to get the nominal percent. A number such as 750 uses another scale, called millesimal fineness, which counts gold in parts per thousand.
- 18K
- 18 out of 24 parts are gold. The nominal fraction is 0.75.
- 750
- 750 gold parts per 1,000 means 75.0% gold.
- 12 g of 18K alloy
- 12 × 0.75 gives 9 g of gold at nominal purity. Use the weight of that alloy alone, excluding stones and components made of another material.
Gold karat and purity chart
The bars show the nominal gold fraction for each karat. The table lists marks you may see on jewelry from different markets. Read a stamped fineness number as written, even when it differs slightly from the karat calculation.
| Karat | Gold by weight | Marks |
|---|---|---|
| 10K | 10/24 · 41.67% | 10K, 417 |
| 14K | 14/24 · 58.33% | 14K, 583, 585 |
| 18K | 18/24 · 75.00% | 18K, 750 |
| 22K | 22/24 · 91.67% | 22K, 916 |
| 24K | 24/24 · 100% nominal | 24K, 999 on fine gold |
A 585 mark specifies 58.5%, slightly above the nominal 58.33% for 14K. A 916 mark specifies 91.6%, and 999 specifies 99.9%. The LBMA guide to gold purity explains the two scales and why marking practices vary.
How to read a gold mark when buying
See the gold hallmark guide for letter marks and compare gold filled with gold plated or gold vermeil with gold plated for layered jewelry.
Read the whole mark
In a U.S. listing, “14K gold” describes the alloy used throughout the part named. “14K GP” describes a 14K gold plate, and “14K GF” describes a bonded 14K gold-alloy layer. A vermeil listing describes a gold coating over sterling silver when it meets the applicable U.S. criteria. Ask the seller to identify every major component and explain any suffix. See the FTC gold-content marking examples.
Check whether the piece is hollow
A hollow 14K chain can have 14K alloy throughout the walls of its links. Under the FTC guides, sellers should disclose a hollow interior and avoid describing a hollow piece as solid. Check the weight, link dimensions, and whether the chain can be repaired before you buy.
Why jewelry makers mix gold with other metals
A maker can change an alloy’s color, stiffness, and workability without changing its karat. Jewelry metallurgist Christopher Corti’s work on gold alloys shows how composition and processing jointly affect what the finished metal can do.
Color
Copper can shift the blend toward rose, palladium can make it whiter, and a rhodium finish can change the color you see at the surface.
Hardness
Pure gold is soft compared with many jewelry alloys, whose scratch resistance also depends on the other metals and how they were worked.
Construction
Look at width, wall thickness, and the connections between parts before comparing a slim solid link with a broad hollow one.
What karat should you choose for jewelry?
For specific buying decisions, compare 10K and 14K gold or 14K and 18K gold.
Start with how often you’ll wear it and where it will take stress. Then compare karat, the weight of each piece, and the cost of maintenance or repair.
Everyday ring
Start with 14K or 18K
Check the thickness of the band and whether the setting protects the stone. If considering 10K for budget, compare rings of a similar build and ask about resizing.
Chain or bracelet
Inspect links and clasp first
Ask whether the links are hollow or solid and check how the clasp attaches. A useful price comparison starts with pieces of similar width, length, and construction.
Pendant or occasional piece
Consider higher karat if purity matters
22K and 24K put more emphasis on gold content. For a design worn occasionally, ask how the bail or pin is supported and how easily the softer surfaces can mark.
Gold karat questions
Is 10K gold real gold?
Yes. A 10K gold alloy contains about 41.67% gold by weight. A listing for 10K gold plating describes a coating. If the offer is ambiguous, ask whether the claimed karat applies through the metal or only to its surface.
What does 925 mean on gold-colored jewelry?
A 925 mark ordinarily identifies sterling silver in the marked part. It gives no gold karat or thickness. A gold-colored piece with that mark could have a coating. Ask the seller what the coating is and which part the mark describes.
Why do two 14K pieces cost different amounts?
Compare grams of alloy first. A heavier piece contains more gold at the same fineness. The retail price also reflects labor, design, stones, condition, and service, so the price per gram of jewelry need not match.
Can a magnet tell me the karat?
A magnet cannot measure the share of gold. A clasp spring may react differently from the rest of the piece. If purity affects what you pay, ask a jeweler to assess the relevant parts and whether surface plating could affect the result.
Does higher-karat gold mean it contains no nickel?
The karat gives the gold fraction. It does not list which metals make up the remainder. If nickel exposure matters to you, check the alloy and any separate post, clasp, or layer under a finish.
What if an older piece has no readable mark?
Check any receipt or repair records and ask what the seller can confirm in writing. A jeweler can inspect the piece and choose a suitable test. Value an unverified claim cautiously, especially if the piece has several parts or a coating.