Gold Hallmarks

Find the mark and read every character

Read the letters after the number as carefully as the number itself. On U.S. jewelry, 14K usually declares the grade of the gold alloy in the part being described. 14K GP describes a gold coating. A mark helps you read the seller’s claim and decide what to verify.

Look up a number · Decode letters · Find a mark

A gold-colored band and necklace clasp with a flat tag on a graphite work surface.
Start with the inside of a ring or the hardware at the end of a chain. Small marks are often placed away from the visible face.

How to read a gold hallmark or stamp

People often call any jewelry stamp a hallmark. A government-recognized assay hallmark, a quality mark, and a maker’s mark do different jobs.

  • Identify the part

    Record whether the mark is on a ring band, chain tag, hinged clasp, or removable earring back.

  • Copy the full line

    Keep fractions, letters, and adjoining symbols together. A suffix can change what the karat describes.

  • Identify the marking system

    Look for a maker’s identifier or a complete assay mark before inferring where or when it was marked.

Gold purity stamp chart

See the gold karat chart for the full purity scale, 10K vs. 14K gold for the 417 and 585 marks, and gold vermeil vs. gold plated for what a silver base can mean.

K, KT, and sometimes ct indicate karat when they describe gold. In a gold fineness mark, three digits give gold parts per thousand. Read the surrounding letters and symbols first, especially on an unknown piece.

Examples of karat and fineness marks on jewelry
Marks you may seeAssociated gradeWhat the digits declare
9ct · 3759K37.5% gold when 375 is the gold fineness mark.
10K · 41710K41.7% gold.
14K · 14KT · 58514K585 means 58.5% gold. The nominal karat fraction is 14/24, about 58.33%.
18K · 75018K75.0% gold.
22K · 91622K916 means 91.6% gold, close to the nominal 22/24 fraction.
24K · 999Fine gold999 means 99.9% gold.

What GF, GP, GEP, HGE, and RGP mean

For a closer look at how these layers are made, compare gold filled and gold plated jewelry.

A karat number can describe the metal through a part or the gold alloy on its surface. Look at what comes after it.

Three illustrative mark examples that include 14K First line, 14K followed by no suffix. Second line, 14K followed by GP for gold plate. Third line, 1/20 then 14K then GF for gold filled. These are text examples, without official symbols or specimen photos. 14K14KGP 1/2014KGF
These typeset examples isolate the characters you need to read. Placement and spacing vary on actual jewelry.
14K
Declares the karat of the alloy in the marked piece or part.
14K GP
The 14K qualifies the gold plating.
1/20 14K GF
The bonded layer is 14K gold alloy. The fraction describes that alloy’s share of the metal weight, rather than the share of pure gold.
Letters and examples you may see on gold-colored jewelry
SuffixWhat it describesExample and reading
GFGold filled, a mechanically bonded gold-alloy layer.1/20 14K GF. The 14K grade refers to the bonded alloy.
GPGold plate or gold plated.18K GP. The number describes the gold layer. The abbreviation alone does not specify the method.
GEP · GEGold electroplate, applied by an electrolytic process.12K GEP. The grade refers to the deposited layer.
HGEHeavy gold electroplate.18K HGE. The FTC example uses a minimum comparable to 2.5 micrometers of fine gold throughout, with the required fineness and coverage.
RGPRolled gold plate, a mechanically applied gold layer.1/40 12K RGP. The fraction describes the layer’s share of metal weight and 12K describes the layer’s alloy.

The FTC’s gold-marking examples distinguish gold filled from rolled gold plate by the weight of the bonded gold alloy, among other conditions. The Gold Filled example calls for that alloy to make up at least 1/20 of the item’s metal weight. The heavy-electroplate figure expresses a fine-gold equivalent. It is not a measurement of the piece you are holding.

Where to look for gold marks

Use angled light and turn the piece slowly. These close-ups show common starting points.

A plain band tilted to show the inner wall along its lower curve.
Rings. Start on the inner shank and look around the full band. Photograph the finish and any nearby letters together.
A necklace clasp, small flat tag, and the end of an oval-link chain.
Chains and bracelets. Check both sides of the tag, the clasp body, and the adjoining hardware. The clasp may have been replaced.
A stud earring on its side with its straight post and a separate butterfly back visible.
Earrings. Check the post and the rear of the body before inspecting a detachable back. The back can come from another pair.

Check removable parts separately

On a pendant, look on the rear and inside the bail, the loop that carries the chain. Record a mark on the chain tag separately from a mark on the pendant. The two pieces may have been bought at different times.

Take two photographs

Take a close-up of the characters and a wider shot that shows exactly which component bears them. If a letter is faint, move the light to one side and try a second angle before guessing.

U.S., UK, and Indian marks

The same fineness number can appear in different markets. To identify the system, look at the marks around the number.

  • United States

    Karat and a responsible party

    Under the FTC’s marking guidance, when a manufacturer or dealer covered by the National Stamping Act applies a qualifying gold quality mark, a name or registered trademark is also required under the applicable conditions. A 14K mark alone is not an assay-office hallmark.

  • United Kingdom

    Sponsor · fineness · assay office

    The UK hallmarking guidance identifies the three compulsory components for an article subject to the requirement. A date letter is optional on current marks. Exemptions and recognized marks can apply.

  • India

    BIS mark · grade · HUID

    Under the BIS HUID scheme, the mark includes the BIS symbol, purity such as 22K916, and a six-character alphanumeric ID. The Bureau of Indian Standards’ app has a lookup for that ID. Older marks can have a different format.

What a stamp can tell you about authenticity

Treat the mark as evidence about a particular part and its stated grade. A stamp can be misapplied, altered, or present on a replacement finding.

Compare the whole mark with the seller’s written description. If the claimed purity helps set the price, ask a qualified jeweler or assay service to examine the relevant parts and assess whether a surface coating affects the reading.

A matching stamp does not verify the seller’s identity, the exact alloy in another component, or the authenticity of a designer signature. Keep the close-up and the context photo together so another person can interpret the same mark.

Gold hallmark questions

Does 925 on gold-colored jewelry mean it is vermeil?

It identifies the declared silver fineness of the marked part. To verify a vermeil description, ask for the sterling base and the gold coating specifications that apply to the piece.

Is 14KP the same as 14K GP?

In U.S. trade usage, KP is commonly read as karat plumb, a fineness claim. GP means gold plate. Read the entire line and confirm the seller’s interpretation instead of treating a faint P as proof of either construction.

Can real gold jewelry be unmarked?

Yes. Marking practices, exemptions, and wear vary. A missing mark leaves the fineness undetermined. Request written details or a professional assessment if the grade matters to a purchase.

What if the clasp and the pendant have different marks?

Record both, along with a photo of each part. The piece may combine different metals or have replacement hardware. Ask which marks apply to the chain, clasp, and pendant before valuing the set.

Can a hallmark tell me the year a ring was made?

A UK date letter can help date the hallmark. Match the letter and its surround to the relevant assay office’s chart. The date of marking may differ from the date the ring was made or sold.

Should I polish a faint mark so I can read it?

Start with a loupe, a camera, and light from the side. Leave aggressive cleaning or polishing to an appropriate professional, especially on plated, antique, or fragile jewelry.

Scroll to Top